1500W 110V 1220mm Acrylic Plastic PVC Bending Machine Heater Hot Heating Bender 1500W 49inch Acrylic Bending Machine Acrylic Light Box Plastic PVC Bender 110V Acrylic Plastic PVC Bending Machine

<p><b>1500W 110V 1220mm Acrylic Plastic PVC Bending Machine Heater Hot Heating Bender</b><br><b>&nbsp;</b><br><b>Description:</b><br>Acrylic hot bending machine is increasingly widely used in decoration engineering, sign making, including square column, door and window edge, display cabinet, fish tank edge, supermarket shelf, curtain wall, large light box, etc. But at present, most of the common hot bending machines on the market are too large, and the hot bending processing often needs to be processed at the construction site according to the actual shape. It is very troublesome to move a large hot bending machine to the construction site. Therefore, we need a machine that can be easily carried and operated. At the same time, we also want to buy an acrylic hot bending machine but do not want to occupy too much area of the store The household solved the problem.<br><b>&nbsp;</b><br><b>Specifications:</b></p> <ul> <li>l&nbsp;Input voltage: AC&nbsp;110V</li> <li>l&nbsp;Heating peak: ZW-300 420 ℃, the other 250 ℃</li> <li>l&nbsp;Heating bending thickness: 1-6mm</li> <li>l&nbsp;Heating port width: 8mm</li> <li>l&nbsp;Effective heating length: 1220 mm</li> <li>l&nbsp;Power:&nbsp;1500W</li> <li>l&nbsp;Gross Weight:&nbsp;4.5kg</li> <li>l&nbsp;Package Dimensions (L x W x H):&nbsp;147*20*12cm</li> </ul> <p>&nbsp;<br><b>Features:</b></p> <ul> <li>l&nbsp;Temperature adjustable&nbsp;- Product temperature is uniform, water circulation cooling.&nbsp;</li> <li>l&nbsp;Portable&nbsp;- Light and practical. Space-saving, hot bending of plastic sheets of various materials, such as thickness more than 6 mm.</li> <li>l&nbsp;Can be heated up and down simultaneously&nbsp;by two heaters.</li> <li>l&nbsp;Can be&nbsp;combined with multiple heaters&nbsp;to heat multiple bending points at one time.</li> <li>l&nbsp;If bending thick plates, slotting bending, bending angle will be more beautiful, you can adapt to local conditions,&nbsp;flexible use.</li> <li>l&nbsp;Can be combined with the worktable into a hot bending machine, can also be used alone.</li> <li>l&nbsp;There is&nbsp;water circulation cooling&nbsp;on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed.</li> <li>l&nbsp;Power supply and water pipe are connected at both ends respectively. Hydropower separation is&nbsp;safe and intuitive, easy to plug and pull, convenient to collect, and&nbsp;easy to assemble&nbsp;with the workbench.</li> </ul> <p><br><b>Instructions:</b></p> <ul> <li>l&nbsp;Keep a cooling tank (barrel) of more than 30 liters. First, connect the heater body and the submersible pump with a silicone hose. Place the submersible pump in the cooling bucket, connect the power supply of the pump, and wait for the water to circulate out. (Note: The water temperature of the machine will keep rising for a long time. Please replace the cold water clearly. The temperature of the circulating water should not drop abruptly. When the water temperature exceeds 50 degrees, the power supply of the heater should be cut off in time, and the circulating water should be replaced later).</li> <li>l&nbsp;Connect the thermostat with the hot bender and connect it to 220V power supply. Adjust the knob of the thermostat controller. The clockwise direction is to raise the temperature, and vice versa. When adjusting, it is not appropriate to rotate too fast in order to avoid damaging the thermostat. (Note: It is advisable to slowly adjust the thermostat to a reddish heat pipe. Excessive temperature will cause damage to the hot bending material and affect the service life of the hot bender).</li> </ul> <p></p> <p><b>Packing list:</b></p> <ul> <li>l&nbsp;1 X Acrylic PVC Bending Machine Heater</li> <li>l&nbsp;1 X Water Pump</li> <li>l&nbsp;2 X Silicone Tubes</li> <li>l&nbsp;1 X Temperature Controller</li> <li>l&nbsp;1 X Water Thermometer</li> </ul> <p></p>